IP-48-ADM
IP 16 bit A/D converter, 48 multiplexed input channels
- 16-bit AD7671 A/D converter
- Acquisition time of ≤2μsec (500Ksps)
- Multiplexed 48 single-ended or 24 differential channels
- Fault and over-voltage protected analog input (-40 VDC to +55 VDC)
- Software programmable single-ended or differential input and gain for each channel
- Input ranges: ±10VDC, ±5VDC, ±2.5VDC, ±1.25VDC via software programmable gain amplifier
- A/D jumper selectable gain (1-2-4-8)
- Internal sequencer with channel list for selected channel acquisition
- On-board input switches for offset or gain calibration
Share this product
IP-48-ADM
IP 16 bit A/D converter, 48 multiplexed input channels
IP-48-ADM
IP 16 bit A/D converter, 48 multiplexed input channels
Share this product
The IP-48-ADM multiplexed A/D module offers a versatile configuration with up to 48 single-ended or 24 differential analog input channels. Each channel is equipped with programmable gain and can be individually programmed to handle analog inputs in either single-ended or differential configurations, or in a calibration mode. The acquisition process can be initiated by the host or by an onboard sequencer that uses a channel list to specify which channels to acquire. The acquired data is stored in a local 64Kx16 dual-ported SRAM, allowing for efficient data handling. Memory pointers can be used to limit the number of scans gathered and control interrupt generation, providing flexible data management options.
Applications:
This is a perfect solution for:
- Process control
- Industrial control
- Precision instrumentation
AD7671 A/D Device Specifications:
- 16-bit, charge redistribution SAR, A/D converter
- Hardware factory-calibrated and tested to ensure SNR and THD are within specifications
- Gain, offset, and linearity are also factory-calibrated
- Throughput
1 MSPS (warp mode)
800 kSPS (normal mode) - INL: ±2.5 LSB Max (±0.0038% of full scale) with no missing code
- Analog input voltage ranges
Bipolar: ±10 V, ±5 V, ±2.5 V
Unipolar: 0 V to 10 V, 0 V to 5 V, 0 V to 2.5 V - No pipeline delay
- Single 5 V supply operation
Industry Pack Specifications:
- Meets ANSI/VITA 4-1995
- 8/32 MHz synchronous operation
- Supports ID, 128 byte I/O, interrupt, & 8 Mbyte memory spaces
- 2 Interrupts per module
- Two passive DMA channels are possible
- Hardware self timed per IP module
- Triggered via system reset and software control
- Jumper or software time-out function
- 5, +/-12 volt reset-able fuse per IP
Mechanical: Environmental:
- Size – VITA 4 compliant: 1.8″ x 3.9″ or 46 mm x 99 mm
- Power – 1.0 watt
- Vibration – 0.5G, 20-2000 Hz rand
- Shock – 20G, 11 msec, 1⁄2 sine
- Weight – 2 ounces
- MTBF – >250,000 hours
Operating Environment:
- Operating temperature
Commercial: 0 to +70 °C
Optional: -25 °C to +80 °C - Non-operating: -40 °C to +85 °C
- Airflow requirement – 5 CFM
- Humidity – 5 to 90% (non-cond)
- Altitude – 0 to 10,000 feet
Part Numbers:
-
- IP-48-ADM: 48 channel 16-bit A/D Industry Pack Module
- IP-48-ADM-8: 8 channel 16-bit A/D Industry Pack Module
- IP-48-ADM-8I: Same as above with -40 to +85°C operating temperature range
Optional Accessories:
- Part Number: TB-50-HDR – 50 pin terminal block and 1 meter flat ribbon cable
- Part Number: CBL-50-HDR – 50 pin, 1 meter flat ribbon cable, IDC header connector
