PRODUCT FILTER
Form Factor
Features & Functions
Cooling
Product Status
Temperature Range
- Controller of dual redundant (A/B channel) 1553 communications
- PCIexpress x1 Lane Interface
- DDC 1553 E
- SRAM 64KX16
- Programmable bus controller, remote terminal, or monitor terminal modes
- Multiprotocol Support of MIL-STD-1553A/B Notice 2 and STANAG 3838
- +3.3V Operation and Logic
- On-chip transceivers/transformer
- Selectable 10, 12, 16, or 20 MHz Systems Clocks
- PCIexpress x1 Lane Interface
- Available in Two Dual redundant MILSTD-1553 Controller (A/B channel)
- Multiprotocol Support: MIL-STD-1553A/B, STANAG-3838, and MIL-STD-1760
- 2Mb RAM per Channel
- Programmable mode: Bus Controller, Remote Terminal with concurrent Bus monitor
- IRIG-106 Chapter 10 Monitor
- Emulate up to 31 RT addresses simultaneously
- Filter based on RT address, T/R bit, Sub-Address
- Transformer Coupled
- IRIG-B Digital Input (optional)
- 8 Digital Discrete I/O (optional)
- 8 Channels 16-bit A/D converter, Simultaneously Sampled
- Fast throughput rate: 200 KSPS for all 8 channels
- 8 Channels SE or 4 PSEUDO Differentials
- Single-ended or 4 differential channels
- True bipolar analog input ranges: ±10 V, ±5 V, selection applies to all Channels
- Analog Input Clamp Protection
- 1MΩ Analog Input Impedance
- Programmable 2nd Order Anti-alias Analog Filter
- Over-sampling capability with digital filter
- 8Kx16 SRAM
- PCIexpress compliant
- ARINC 429-based PCIe-Mini card ARINC controller
- Up to 4 transmitters and 8 receivers channels for ARINC controller
- Programmable label recognition for 256 labels per channel
- 32 x 32 Receive FIFOs and Priority-Label buffers
- Dependent data rates for Transmit and Receive
- Meets the ARINC 429 specifications for loading, level detection, timing, and protocol
- X1 PCIe X1 PCIexpress Bridge
- FPGA, 32Mb SRAM, ARINC 429 Tx#1 RX#1 RX#2 RX#7 RX#8
- X4 Channels IRIG-B Tx#4 I/O
- Software selected data rate of 12.5 kbps or 100 kbps with automatic slew rate adjustment
- Burst and continuous mode available
- Programmable word length selection, with the parity bit generated automatically
- Programmable Interrupt support
- Differential IRIG B Input
- 8-channel Sense Operation (GND/Open or 28V/Open)
- Discrete Input Tolerance: 0 to 70V
- Programmable Thresholds and Hysteresis
- Discrete input thresholds are programmable in the range of 2V to 12V
- Sense inputs lightning protected to RTCA/DO160G, Section 22 Level 3
- Airbus ABD0100H compliance
- 1.2 Ohm On Resistance (typical)
- 8-channel Low-Side 500 mA Drivers
CAN Bus:
- High Speed CAN interface according to ISO 11898-2
- Time-stamped CAN messages, Supports 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers
- Bit rates: 10 to 1000 kbps, Reliable error handling, Low power consumption
- NEMA Compliance, Isolated CAN Channels
USB Interface:
- Fully compliant with USB 2.0 specification
- Supports Control, Bulk, Interrupt, and Isochronous endpoints
- Endpoint maximum packet size selection by software
- Supports DMA transfers with the DMA RAM of 16 KB
- USB host controller, OHCI compliant, Two downstream ports