- Form Factor: 6U VME module
- I/O Channels: 16 relay driver outputs and 16 high-voltage optically isolated inputs
- VME Interface: A32/24/16, D16/8 with R/M/W cycle and 1-7 software programmable interrupts
- Front Panel Connectors: Front panel I/O connectors available
- Driver Type: 16 MOSFET drivers
- Drive Capability: 2A resistive load
- Drive Voltage: 5V to 40V
VME32-IO
6U VME MODULE 16 RELAY DRIVER OUTPUT AND 16 HIGH VOLTAGE INPUT
- Form Factor: 6U VME module
- I/O Channels: 16 relay driver outputs and 16 high-voltage optically isolated inputs
- VME Interface: A32/24/16, D16/8 with R/M/W cycle and 1-7 software programmable interrupts
- Front Panel Connectors: Front panel I/O connectors available
- Driver Type: 16 MOSFET drivers
- Drive Capability: 2A resistive load
- Drive Voltage: 5V to 40V
Share this product
LinkedIn
VME32-IO
6U VME MODULE 16 RELAY DRIVER OUTPUT AND 16 HIGH VOLTAGE INPUT
The VME32-IO Module is designed to provide a comprehensive solution for control and monitoring applications, featuring 16 switched outputs and 16 optically isolated input channels. This configuration makes it ideal for managing switches and indicators or similar devices. The module is particularly suited for applications requiring compatibility with a wide range of input and output voltages, from 0 to 40 volts. It offers 32 independent channels accessible via the VME bus, allowing for flexible integration into various systems.
VME Features
- A32/24/16 address modes and D16/8 data modes
- Module size: 6U, 233 x 160mm
VME Interface
- A32/A24/A16 address modes with D16/D08 data modes
- Read, modify, and write cycles supported
- Interrupts: software-programmable from 1 to 7
I/O Panel Connectors
- Front panel I/O connectors
Mechanical & Environmental Specifications
- Operating temperature: 0 to +70 °C
- Airflow requirement: 10 CFM
- Humidity: 5 to 90% (non-cond.)
- Vibration resistance: 0.5G RMS (20-2000 Hz)
- Shock resistance: 20 G (11 ms, ½ sine)
- MTBF: >172,000 hours
Output Specifications
- 16 MOSFET drivers
- Drive capability: 2A resistive
- Drive voltage: 5V to 40V
Input Specifications
- 16 optically isolated inputs
- Input voltage range: 5 to 60V
- Software-programmable change of state detection
- Rising or falling edge detection per channel
- Software-programmable interrupts on any or all change of state bits
- Debounce filter
Ordering Information:
- Part Number: VME-32IO
- 6U VME 32 I/O Channels
- Form Factor: 6U VME module
- I/O Channels: 16 relay driver outputs and 16 high-voltage optically isolated inputs
- VME Interface: A32/24/16, D16/8 with R/M/W cycle and 1-7 software programmable interrupts
- Front Panel Connectors: Front panel I/O connectors available
- Driver Type: 16 MOSFET drivers
- Drive Capability: 2A resistive load
- Drive Voltage: 5V to 40V
| Mechanical Interface | Switched Mezzanine Card (XMC) Interface confirming to ANSI/VITA 42.0-2008 (Auxiliary Standard) Standard single-width (149mm x 74mm) | |||||||||
| Electrical Interface | PCI Express x4 Link (Base Specification 2.1) compliant interface conforming to ANSI/VITA 42.3-2006 (PCI Express Protocol Layer Standard) | |||||||||
| PCI Express Switch | PI7C9X2G312GP (Pericom) | |||||||||
| PCI Express to PCI Bridge | XIO2001 (Texas Instruments) | |||||||||
| User configurable FPGA | TXMC639-10R: XC7K160T-2FBG676I (AMD) TXMC639-11R: XC7K325T-2FBG676I (AMD) | |||||||||
| SPI-Flash | MT25QL128 (Micron) 128 Mbit (contains TXMC639 FPGA BRD) or compatible; +3.3 V supply voltage | |||||||||
| DDR3 RAM | 2x MT41K256M16TW-107 (Micron) 256Meg x 32 bit | |||||||||
| Board Configuration Controller | LCMXO2-7000HC (Lattice) | |||||||||
| ADC | LTC2320 -16 (Analog Devices) | |||||||||
| DAC | AD5547BRUZ (Analog Devices) | |||||||||
| A/D Channels | TXMC639-10R: 8 Differential 16bit A/D Channels TXMC639-11R: 16 Differential 16bit A/D Channels Input Configuration per BCC Device: Input Voltage Ranges: Differental : ±20.57 V, ±10.28 V or ±5.14 V (Single-Ended: ±10.28 V, ±5.14 V or ±2.57 V) All analog inputs are connected via an impedance converter and a second operation amplifier for level adjustment and filtering to the differential ADC inputs. The -3 dB limit of this input stage is at approx. 8MHz | |||||||||
| D/A Channels | TXMC639-10R: 4 Single-Ended 16 Bit D/A Channels TXMC639-11R: 8 Single-Ended 16 Bit D/A Channels Output range configurable per D/A channel. Maximum single-ended Output Voltage – Vout: ±10 V Maximum Output Drive Current for each Output: 10 mA Maximum Capacitive Load for each Output: 1000 pF Typical Settling Time for a 10 mA / 1000 pF: < 1 µs | |||||||||
| Digital Front I/O Channels | 32 digital I/O Lines
| |||||||||
| Digital Rear I/O Channels | 64 direct FPGA I/O lines to P14 Rear I/O connector
4 MGT line to P16 Rear I/O connector
| |||||||||
| Front I/O | Front I/O Samtec – ERF8_050_01_L_D_RA_L_TR | |||||||||
| P14 Rear I/O | 64 pin Mezzanine Connector (Molex 71436-2864 or compatible) | |||||||||
| P16 Rear I/O | 114 pin Mezzanine Connector (Samtec – ASP-105885-01) | |||||||||
| Power Requirements 1) | Depends on FPGA design With TXMC639 Board Reference Design / without external load
| |||||||||
| Temperature Range | Operating: – 40 °C to + 85 °C Storage: – 55 °C to + 125 °C | |||||||||
| MTBF 1) | 157 000 h to 161 000 h | |||||||||
| Humidity | 5% – 95% non-condensing | |||||||||
| Weight | 140 g |
1) depends on variant, for further details see User Manual
TXMC639-10R
| 8x Analog In, 4x Analog Out, XC7K160T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K160T-2FBG676), 1GB DDR3, 8x Analog In, 4x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
TXMC639-11R
| 16x Analog In, 8x Analog Out, XC7K325T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K325T-2FBG676), 1GB DDR3, 16x Analog In, 8x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
SOFTWARE
Share this product
LinkedIn
