- Form Factor: 6U VME module
- Industry Pack Support: Supports four Industry Pack sites, single or dual widths
- I/O Lines: A total of 200 discrete I/O lines available
- Compatibility: Industry standard Industry Packs from Alphi Tech and others
- I/O Flexibility: Suitable for applications requiring low-cost, high-density I/O or unique combinations
VME-4SIP-3
6U VME MODULE 4 INDUSTRY PACK CARRIER
- Form Factor: 6U VME module
- Industry Pack Support: Supports four Industry Pack sites, single or dual widths
- I/O Lines: A total of 200 discrete I/O lines available
- Compatibility: Industry standard Industry Packs from Alphi Tech and others
- I/O Flexibility: Suitable for applications requiring low-cost, high-density I/O or unique combinations
Share this product
LinkedIn
VME-4SIP-3
6U VME MODULE 4 INDUSTRY PACK CARRIER
The new VME-4SIP-3 Module offers a 6U high-performance flexible I/O scheme that supports industry-standard Industry Packs. Users can choose from over 100 different Industry Packs available from Alphi Tech and other manufacturers. This module is ideal for applications requiring low-cost, high-density I/O or unique combinations, making it a perfect solution. A total of 200 discrete I/O lines are available. For a comprehensive list of Industry Packs offered by Alphi Technology, users can visit their website at www.alphitech.com.
VME Features
- Address modes: A32/24/16
- Data paths: D16/8
- 6U form factor, 233 x 160mm
VME Interface
- Supports A32/A24/A16 address modes with D16/D08 data paths
- Includes read-modify-write cycles
- Interrupts: software-programmable from 1 to 7 levels
I/O Panel Connectors
- Four 50-pin IDE connectors on the front panel
Industry Pack Specifications
- Four sites supporting single or dual-width modules
- Meets ANSI VITA 4 standards
- Operates at 8 MHz or 32 MHz
- Supports ID, I/O, interrupt, and memory spaces
- Each module can address 1 MB or 8 MB of memory
- Hardware self-timed per module, triggered by system reset and software control
- Jumper or software time-out functions available
- Power management includes 5V and +/-12V resettable fuses per IP module
- Supports 8-bit and 16-bit data
- Supports single or double-size IP modules
Part Number: VME-4SIP-3
-
- 6U VME (4) Industry Packs Carrier, Commercial temperature range: 0 to +70 °C
- Part Number: VME-4SIP-3-I
- 6U VME (4) Industry Packs Carrier, Industrial temperature range: -40 to +85 °C
Optional Accessories:
- Part Number: CBL-50-HDR
- 50-pin Header cable
- Part Number: TB-50-HDR
- Terminal Block
- Form Factor: 6U VME module
- Industry Pack Support: Supports four Industry Pack sites, single or dual widths
- I/O Lines: A total of 200 discrete I/O lines available
- Compatibility: Industry standard Industry Packs from Alphi Tech and others
- I/O Flexibility: Suitable for applications requiring low-cost, high-density I/O or unique combinations
| Mechanical Interface | Switched Mezzanine Card (XMC) Interface confirming to ANSI/VITA 42.0-2008 (Auxiliary Standard) Standard single-width (149mm x 74mm) | |||||||||
| Electrical Interface | PCI Express x4 Link (Base Specification 2.1) compliant interface conforming to ANSI/VITA 42.3-2006 (PCI Express Protocol Layer Standard) | |||||||||
| PCI Express Switch | PI7C9X2G312GP (Pericom) | |||||||||
| PCI Express to PCI Bridge | XIO2001 (Texas Instruments) | |||||||||
| User configurable FPGA | TXMC639-10R: XC7K160T-2FBG676I (AMD) TXMC639-11R: XC7K325T-2FBG676I (AMD) | |||||||||
| SPI-Flash | MT25QL128 (Micron) 128 Mbit (contains TXMC639 FPGA BRD) or compatible; +3.3 V supply voltage | |||||||||
| DDR3 RAM | 2x MT41K256M16TW-107 (Micron) 256Meg x 32 bit | |||||||||
| Board Configuration Controller | LCMXO2-7000HC (Lattice) | |||||||||
| ADC | LTC2320 -16 (Analog Devices) | |||||||||
| DAC | AD5547BRUZ (Analog Devices) | |||||||||
| A/D Channels | TXMC639-10R: 8 Differential 16bit A/D Channels TXMC639-11R: 16 Differential 16bit A/D Channels Input Configuration per BCC Device: Input Voltage Ranges: Differental : ±20.57 V, ±10.28 V or ±5.14 V (Single-Ended: ±10.28 V, ±5.14 V or ±2.57 V) All analog inputs are connected via an impedance converter and a second operation amplifier for level adjustment and filtering to the differential ADC inputs. The -3 dB limit of this input stage is at approx. 8MHz | |||||||||
| D/A Channels | TXMC639-10R: 4 Single-Ended 16 Bit D/A Channels TXMC639-11R: 8 Single-Ended 16 Bit D/A Channels Output range configurable per D/A channel. Maximum single-ended Output Voltage – Vout: ±10 V Maximum Output Drive Current for each Output: 10 mA Maximum Capacitive Load for each Output: 1000 pF Typical Settling Time for a 10 mA / 1000 pF: < 1 µs | |||||||||
| Digital Front I/O Channels | 32 digital I/O Lines
| |||||||||
| Digital Rear I/O Channels | 64 direct FPGA I/O lines to P14 Rear I/O connector
4 MGT line to P16 Rear I/O connector
| |||||||||
| Front I/O | Front I/O Samtec – ERF8_050_01_L_D_RA_L_TR | |||||||||
| P14 Rear I/O | 64 pin Mezzanine Connector (Molex 71436-2864 or compatible) | |||||||||
| P16 Rear I/O | 114 pin Mezzanine Connector (Samtec – ASP-105885-01) | |||||||||
| Power Requirements 1) | Depends on FPGA design With TXMC639 Board Reference Design / without external load
| |||||||||
| Temperature Range | Operating: – 40 °C to + 85 °C Storage: – 55 °C to + 125 °C | |||||||||
| MTBF 1) | 157 000 h to 161 000 h | |||||||||
| Humidity | 5% – 95% non-condensing | |||||||||
| Weight | 140 g |
1) depends on variant, for further details see User Manual
TXMC639-10R
| 8x Analog In, 4x Analog Out, XC7K160T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K160T-2FBG676), 1GB DDR3, 8x Analog In, 4x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
TXMC639-11R
| 16x Analog In, 8x Analog Out, XC7K325T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K325T-2FBG676), 1GB DDR3, 16x Analog In, 8x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
SOFTWARE
Share this product
LinkedIn
