- Form Factor: 6U VME module
- Serial Controller: 16-channel serial communication controller
- Serial Interface: Based on 8 enhanced Z85230 controllers
- FIFO Size: 4K FIFO per line (TX and RX)
- Supported Protocols: Software-selectable RS-232, RS-422, RS-485, HDLC, SDLC
- Baud Rate Generators: Individual baud rate generators per port
- Baud Rates: Asynchronous up to 230 kbaud, synchronous up to 2 Mbaud
- Handshake Control: Full handshake control lines
- Termination: Software-programmable 100 Ohm termination
- Modem Control: Full modem control
VME-SCC16
6U VME MODULE 16 CHANNELS SERIAL CONTROLLER Programmable RS-232, RS-422/485
- Form Factor: 6U VME module
- Serial Controller: 16-channel serial communication controller
- Serial Interface: Based on 8 enhanced Z85230 controllers
- FIFO Size: 4K FIFO per line (TX and RX)
- Supported Protocols: Software-selectable RS-232, RS-422, RS-485, HDLC, SDLC
- Baud Rate Generators: Individual baud rate generators per port
- Baud Rates: Asynchronous up to 230 kbaud, synchronous up to 2 Mbaud
- Handshake Control: Full handshake control lines
- Termination: Software-programmable 100 Ohm termination
- Modem Control: Full modem control
Share this product
LinkedIn
VME-SCC16
6U VME MODULE 16 CHANNELS SERIAL CONTROLLER Programmable RS-232, RS-422/485
The VME-SCC16 module is a 16-channel serial communication controller featuring 4K FIFO per line. It is based on eight enhanced Z85230 chips, offering larger FIFOs and several SDLC improvements from Zilog. This module provides sixteen asynchronous ports capable of speeds up to 230 kbaud and synchronous ports up to 2 Mbaud, supporting full-duplex channels. Each channel has an independent baud rate generator. The VME-SCC16 module supports various interfaces, including RS-232, RS-422, and RS-485.
VME Features
- A32/24/16 address modes and D16/8 data modes
- Module size: 6U, 233 x 160mm
VME Interface
- A32/A24/A16 address modes with D16/D08 data modes
- Read, modify, and write cycles supported
- Interrupts: software programmable from 1 to 7
Mechanical & Environmental Specifications
- Operating temperature: 0 to +70 °C
- Airflow requirement: 10 CFM
- Humidity: 5 to 90% (non-cond.)
- Vibration resistance: 0.5G RMS (20-2000 Hz)
- Shock resistance: 20 G (11 ms, ½ sine)
- MTBF: >172,000 hours
Serial Interface
- 16 Z85230 enhanced serial controllers
- 16 synchronous and asynchronous serial ports
- 4K FIFO per line (TX and RX)
- Software-selectable RS-232, RS-422, RS-485, HDLC, and SDLC protocols
- Individual baud rate generators per port
- Asynchronous speed: up to 230 Kbits
- Synchronous speed: up to 2 Mbits
- Full handshake control lines
- Software-programmable 100 Ohm termination
- Full modem control
- Software examples included
I/O Panel Connectors
- Front panel I/O connector
Part Number: VME-SCC16
- 6U VME 16 Serial Controller Channels
- Form Factor: 6U VME module
- Serial Controller: 16-channel serial communication controller
- Serial Interface: Based on 8 enhanced Z85230 controllers
- FIFO Size: 4K FIFO per line (TX and RX)
- Supported Protocols: Software-selectable RS-232, RS-422, RS-485, HDLC, SDLC
- Baud Rate Generators: Individual baud rate generators per port
- Baud Rates: Asynchronous up to 230 kbaud, synchronous up to 2 Mbaud
- Handshake Control: Full handshake control lines
- Termination: Software-programmable 100 Ohm termination
- Modem Control: Full modem control
| Mechanical Interface | Switched Mezzanine Card (XMC) Interface confirming to ANSI/VITA 42.0-2008 (Auxiliary Standard) Standard single-width (149mm x 74mm) | |||||||||
| Electrical Interface | PCI Express x4 Link (Base Specification 2.1) compliant interface conforming to ANSI/VITA 42.3-2006 (PCI Express Protocol Layer Standard) | |||||||||
| PCI Express Switch | PI7C9X2G312GP (Pericom) | |||||||||
| PCI Express to PCI Bridge | XIO2001 (Texas Instruments) | |||||||||
| User configurable FPGA | TXMC639-10R: XC7K160T-2FBG676I (AMD) TXMC639-11R: XC7K325T-2FBG676I (AMD) | |||||||||
| SPI-Flash | MT25QL128 (Micron) 128 Mbit (contains TXMC639 FPGA BRD) or compatible; +3.3 V supply voltage | |||||||||
| DDR3 RAM | 2x MT41K256M16TW-107 (Micron) 256Meg x 32 bit | |||||||||
| Board Configuration Controller | LCMXO2-7000HC (Lattice) | |||||||||
| ADC | LTC2320 -16 (Analog Devices) | |||||||||
| DAC | AD5547BRUZ (Analog Devices) | |||||||||
| A/D Channels | TXMC639-10R: 8 Differential 16bit A/D Channels TXMC639-11R: 16 Differential 16bit A/D Channels Input Configuration per BCC Device: Input Voltage Ranges: Differental : ±20.57 V, ±10.28 V or ±5.14 V (Single-Ended: ±10.28 V, ±5.14 V or ±2.57 V) All analog inputs are connected via an impedance converter and a second operation amplifier for level adjustment and filtering to the differential ADC inputs. The -3 dB limit of this input stage is at approx. 8MHz | |||||||||
| D/A Channels | TXMC639-10R: 4 Single-Ended 16 Bit D/A Channels TXMC639-11R: 8 Single-Ended 16 Bit D/A Channels Output range configurable per D/A channel. Maximum single-ended Output Voltage – Vout: ±10 V Maximum Output Drive Current for each Output: 10 mA Maximum Capacitive Load for each Output: 1000 pF Typical Settling Time for a 10 mA / 1000 pF: < 1 µs | |||||||||
| Digital Front I/O Channels | 32 digital I/O Lines
| |||||||||
| Digital Rear I/O Channels | 64 direct FPGA I/O lines to P14 Rear I/O connector
4 MGT line to P16 Rear I/O connector
| |||||||||
| Front I/O | Front I/O Samtec – ERF8_050_01_L_D_RA_L_TR | |||||||||
| P14 Rear I/O | 64 pin Mezzanine Connector (Molex 71436-2864 or compatible) | |||||||||
| P16 Rear I/O | 114 pin Mezzanine Connector (Samtec – ASP-105885-01) | |||||||||
| Power Requirements 1) | Depends on FPGA design With TXMC639 Board Reference Design / without external load
| |||||||||
| Temperature Range | Operating: – 40 °C to + 85 °C Storage: – 55 °C to + 125 °C | |||||||||
| MTBF 1) | 157 000 h to 161 000 h | |||||||||
| Humidity | 5% – 95% non-condensing | |||||||||
| Weight | 140 g |
1) depends on variant, for further details see User Manual
TXMC639-10R
| 8x Analog In, 4x Analog Out, XC7K160T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K160T-2FBG676), 1GB DDR3, 8x Analog In, 4x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
TXMC639-11R
| 16x Analog In, 8x Analog Out, XC7K325T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K325T-2FBG676), 1GB DDR3, 16x Analog In, 8x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
SOFTWARE
Share this product
LinkedIn
