- Interface: PCIe x1 module
- Front Panel I/O: Available
- Optical Isolation: 64 inputs and 64 outputs optically isolated
- Back-to-Back Optically Isolated Diode Input: No polarity input required with selectable voltage dropping resistor in series
- Isolation Voltage: 5300V RMS
- Cooling Option: Conductive cooled option available
- Form Factor: 6U form factor
PCIe-DIDO64-ISO
PCIe 96 Input I/O Card Isolated
- Interface: PCIe x1 module
- Front Panel I/O: Available
- Optical Isolation: 64 inputs and 64 outputs optically isolated
- Back-to-Back Optically Isolated Diode Input: No polarity input required with selectable voltage dropping resistor in series
- Isolation Voltage: 5300V RMS
- Cooling Option: Conductive cooled option available
- Form Factor: 6U form factor
Share this product
LinkedIn
PCIe-DIDO64-ISO
PCIe 96 Input I/O Card Isolated
The input/output board is controlled by an FPGA, which provides timing and control for all I/O operations. Each input and output is equipped with its own optical isolation, ensuring electrical separation and safety. Additionally, a hardware-adjustable resistor/opto-diode combination is available to accommodate various input voltage ranges. The board interfaces with a host computer via a PCI controller, and all I/O connections are accessible from the rear panel.
Z8536 Features
- Two independent 8-bit, double-buffered bidirectional I/O ports
- I/O ports feature programmable polarity
- Programmable direction at the bit level
- Flexible pattern-recognition logic; programmable as a 16-bit vector interrupt controller
- Three independent 16-bit counter/timers with up to four external access lines per counter/timer
- Four handshake modes
- All internal registers are readable and writable
- All registers have their own unique address for direct access
PCI Bus Controller Features
- Uses the AMCC S5935 PCI controller
- PCI 2.1 compliant master/slave
- Transfer rate of 132 Mbytes/sec
- Supports Windows NT service pack 2 & 3
- PCI bus operation from DC to 33 MHz
- Four definable pass-through data channels
- Two 32-byte internal FIFOs with DMA
- Mailbox registers with byte-level status
- Direct PCI and add-on interrupt pins
- Supports serial nvRAM configuration space
I/O Specifications
- 48 input pins, front panel accessible
- SCSI 2 style front panel connector
- Input current and threshold are a function of the hardware-adjustable resistor and input voltage range
- Input threshold options:
- 4.7K: 4V to 30V input, 3V threshold
- 10K: 7.5V to 44V input, 5.4V threshold
- 20K: 14V to 60V input, 9.8V threshold
- Optically isolated to 2500 VDC
Operating Environment
- Operating temperature:
- Commercial: 0 to +70 °C
- Optional: -25 °C to +80 °C
- Non-operating temperature: -40 °C to +85 °C
- Airflow requirement: 5 CFM
- Humidity: 5 to 90% (non-condensing)
- Altitude: Up to 10,000 feet
Mechanical Environment
- Size: 3U CPCI module, 100mm x 160mm
- Power consumption: 1.5 watts
- Vibration resistance: 0.5G, 20-2000 Hz random
- Shock resistance: 20G, 11 ms, ½ sine
- Weight: 4 ounces
- MTBF: >250,000 hours
Ordering Information:
- Part Number: CPCI-96DIO-ISO
- 96 channel input/output; optically isolated; 4-30V input range
Optional Accessories:
- 8536 Features: Includes two independent 8-bit, double-buffered bidirectional I/O ports with programmable polarity and direction at the bit level.
- Interface: PCIe x1 module
- Front Panel I/O: Available
- Optical Isolation: 64 inputs and 64 outputs optically isolated
- Back-to-Back Optically Isolated Diode Input: No polarity input required with selectable voltage dropping resistor in series
- Isolation Voltage: 5300V RMS
- Cooling Option: Conductive cooled option available
- Form Factor: 6U form factor
| Mechanical Interface | Switched Mezzanine Card (XMC) Interface confirming to ANSI/VITA 42.0-2008 (Auxiliary Standard) Standard single-width (149mm x 74mm) | |||||||||
| Electrical Interface | PCI Express x4 Link (Base Specification 2.1) compliant interface conforming to ANSI/VITA 42.3-2006 (PCI Express Protocol Layer Standard) | |||||||||
| PCI Express Switch | PI7C9X2G312GP (Pericom) | |||||||||
| PCI Express to PCI Bridge | XIO2001 (Texas Instruments) | |||||||||
| User configurable FPGA | TXMC639-10R: XC7K160T-2FBG676I (AMD) TXMC639-11R: XC7K325T-2FBG676I (AMD) | |||||||||
| SPI-Flash | MT25QL128 (Micron) 128 Mbit (contains TXMC639 FPGA BRD) or compatible; +3.3 V supply voltage | |||||||||
| DDR3 RAM | 2x MT41K256M16TW-107 (Micron) 256Meg x 32 bit | |||||||||
| Board Configuration Controller | LCMXO2-7000HC (Lattice) | |||||||||
| ADC | LTC2320 -16 (Analog Devices) | |||||||||
| DAC | AD5547BRUZ (Analog Devices) | |||||||||
| A/D Channels | TXMC639-10R: 8 Differential 16bit A/D Channels TXMC639-11R: 16 Differential 16bit A/D Channels Input Configuration per BCC Device: Input Voltage Ranges: Differental : ±20.57 V, ±10.28 V or ±5.14 V (Single-Ended: ±10.28 V, ±5.14 V or ±2.57 V) All analog inputs are connected via an impedance converter and a second operation amplifier for level adjustment and filtering to the differential ADC inputs. The -3 dB limit of this input stage is at approx. 8MHz | |||||||||
| D/A Channels | TXMC639-10R: 4 Single-Ended 16 Bit D/A Channels TXMC639-11R: 8 Single-Ended 16 Bit D/A Channels Output range configurable per D/A channel. Maximum single-ended Output Voltage – Vout: ±10 V Maximum Output Drive Current for each Output: 10 mA Maximum Capacitive Load for each Output: 1000 pF Typical Settling Time for a 10 mA / 1000 pF: < 1 µs | |||||||||
| Digital Front I/O Channels | 32 digital I/O Lines
| |||||||||
| Digital Rear I/O Channels | 64 direct FPGA I/O lines to P14 Rear I/O connector
4 MGT line to P16 Rear I/O connector
| |||||||||
| Front I/O | Front I/O Samtec – ERF8_050_01_L_D_RA_L_TR | |||||||||
| P14 Rear I/O | 64 pin Mezzanine Connector (Molex 71436-2864 or compatible) | |||||||||
| P16 Rear I/O | 114 pin Mezzanine Connector (Samtec – ASP-105885-01) | |||||||||
| Power Requirements 1) | Depends on FPGA design With TXMC639 Board Reference Design / without external load
| |||||||||
| Temperature Range | Operating: – 40 °C to + 85 °C Storage: – 55 °C to + 125 °C | |||||||||
| MTBF 1) | 157 000 h to 161 000 h | |||||||||
| Humidity | 5% – 95% non-condensing | |||||||||
| Weight | 140 g |
1) depends on variant, for further details see User Manual
TXMC639-10R
| 8x Analog In, 4x Analog Out, XC7K160T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K160T-2FBG676), 1GB DDR3, 8x Analog In, 4x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
TXMC639-11R
| 16x Analog In, 8x Analog Out, XC7K325T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K325T-2FBG676), 1GB DDR3, 16x Analog In, 8x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
SOFTWARE
Share this product
LinkedIn
