- M.2 30mm x 42mm board size
- M.2 PCI Express x1 lane interface
- M.2 3042 Key B & M
- Accepts all NTSC and PAL inputs with auto detection
- Up to 8 channels full frame rate D1 video
- Up to 8 channels audio to PCM
- Multiple video output formats
- Motion detection capability for each channel
- Integrated video anti-alias filters
M.2-FGRS-170A
Frame Grabber RS-170A
8 Channels Video & Audio
M.2 30x42mm
- M.2 30mm x 42mm board size
- M.2 PCI Express x1 lane interface
- M.2 3042 Key B & M
- Accepts all NTSC and PAL inputs with auto detection
- Up to 8 channels full frame rate D1 video
- Up to 8 channels audio to PCM
- Multiple video output formats
- Motion detection capability for each channel
- Integrated video anti-alias filters
Share this product
LinkedIn
M.2-FGRS-170A
Frame Grabber RS-170A
8 Channels Video & Audio
M.2 30x42mm
The M.2-FGRS-170A can simultaneously capture up to 8 NTSC or PAL video channels and up to 8 audio inputs for storage and analysis. Per-channel video capture and streaming occur at full frame rates of 30 fps for NTSC and 25 fps for PAL. Audio capture occurs at sample rates up to 48kHz per channel.
Motion detection and audio detection are available for all video and audio channels.
After data are captured, they can be transferred via DMA to system memory for display or analysis, or to mass storage.
Input/Output Specifications
- Input video: NTSC (M/N/4.43), PAL (B/D/G/H/I/K/L/M/N/60) with auto detection
- Anti-aliasing filter to prevent out-of-band frequency in input signal
- Output video: UYVY/Y422, YUYV/YUY2, IYU1/Y411, Y41P, YUV420, RGB555, RGB565
- Motion detection for each video channel
- Input audio: ADCs frequency selectable at 8/16/32/44.1/48 kHz
- Output audio: 8/16-bit PCM
- Audio detection for each audio channel
Operating Environment
- Operating temperature Industrial: -40ºC to +85ºC
- Non-operating: -50ºC to +90ºC
- Airflow requirement: .5CFM
- Humidity: 5 to 90% (non-cond)
- Altitude: 0 to 10,000 feet
Available Software Drivers
- Linux® drivers, Video4Linux2 API
- Windows® drivers
Mechanical
- Size: M.2 Module Key B & M (30mm x 42mm)
- Power: 1.5W max
- Front panel I/O
- Vibration: 0.5G, 20-2000Hz rand
- Shock: 20G, 11ms, ½ sine
- Weight: 10g (0.4oz)
- MTBF: >250,000 hours
Ordering Information
- Part Number: M.2-FGRS-170A
- Description: M.2 Frame Grabber 8 channels Video & Audio
- Option (add following the part number): C (Conformal coat)
Optional Accessories
- Part Number: CBL-FGRS-170A
- Description: 4 Sets Plug in Cable
Data Sheet – Link Here
- M.2 30mm x 42mm board size
- M.2 PCI Express x1 lane interface
- M.2 3042 Key B & M
- Accepts all NTSC and PAL inputs with auto detection
- Up to 8 channels full frame rate D1 video
- Up to 8 channels audio to PCM
- Multiple video output formats
- Motion detection capability for each channel
- Integrated video anti-alias filters
| Mechanical Interface | Switched Mezzanine Card (XMC) Interface confirming to ANSI/VITA 42.0-2008 (Auxiliary Standard) Standard single-width (149mm x 74mm) | |||||||||
| Electrical Interface | PCI Express x4 Link (Base Specification 2.1) compliant interface conforming to ANSI/VITA 42.3-2006 (PCI Express Protocol Layer Standard) | |||||||||
| PCI Express Switch | PI7C9X2G312GP (Pericom) | |||||||||
| PCI Express to PCI Bridge | XIO2001 (Texas Instruments) | |||||||||
| User configurable FPGA | TXMC639-10R: XC7K160T-2FBG676I (AMD) TXMC639-11R: XC7K325T-2FBG676I (AMD) | |||||||||
| SPI-Flash | MT25QL128 (Micron) 128 Mbit (contains TXMC639 FPGA BRD) or compatible; +3.3 V supply voltage | |||||||||
| DDR3 RAM | 2x MT41K256M16TW-107 (Micron) 256Meg x 32 bit | |||||||||
| Board Configuration Controller | LCMXO2-7000HC (Lattice) | |||||||||
| ADC | LTC2320 -16 (Analog Devices) | |||||||||
| DAC | AD5547BRUZ (Analog Devices) | |||||||||
| A/D Channels | TXMC639-10R: 8 Differential 16bit A/D Channels TXMC639-11R: 16 Differential 16bit A/D Channels Input Configuration per BCC Device: Input Voltage Ranges: Differental : ±20.57 V, ±10.28 V or ±5.14 V (Single-Ended: ±10.28 V, ±5.14 V or ±2.57 V) All analog inputs are connected via an impedance converter and a second operation amplifier for level adjustment and filtering to the differential ADC inputs. The -3 dB limit of this input stage is at approx. 8MHz | |||||||||
| D/A Channels | TXMC639-10R: 4 Single-Ended 16 Bit D/A Channels TXMC639-11R: 8 Single-Ended 16 Bit D/A Channels Output range configurable per D/A channel. Maximum single-ended Output Voltage – Vout: ±10 V Maximum Output Drive Current for each Output: 10 mA Maximum Capacitive Load for each Output: 1000 pF Typical Settling Time for a 10 mA / 1000 pF: < 1 µs | |||||||||
| Digital Front I/O Channels | 32 digital I/O Lines
| |||||||||
| Digital Rear I/O Channels | 64 direct FPGA I/O lines to P14 Rear I/O connector
4 MGT line to P16 Rear I/O connector
| |||||||||
| Front I/O | Front I/O Samtec – ERF8_050_01_L_D_RA_L_TR | |||||||||
| P14 Rear I/O | 64 pin Mezzanine Connector (Molex 71436-2864 or compatible) | |||||||||
| P16 Rear I/O | 114 pin Mezzanine Connector (Samtec – ASP-105885-01) | |||||||||
| Power Requirements 1) | Depends on FPGA design With TXMC639 Board Reference Design / without external load
| |||||||||
| Temperature Range | Operating: – 40 °C to + 85 °C Storage: – 55 °C to + 125 °C | |||||||||
| MTBF 1) | 157 000 h to 161 000 h | |||||||||
| Humidity | 5% – 95% non-condensing | |||||||||
| Weight | 140 g |
1) depends on variant, for further details see User Manual
TXMC639-10R
| 8x Analog In, 4x Analog Out, XC7K160T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K160T-2FBG676), 1GB DDR3, 8x Analog In, 4x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
TXMC639-11R
| 16x Analog In, 8x Analog Out, XC7K325T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K325T-2FBG676), 1GB DDR3, 16x Analog In, 8x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
SOFTWARE
Share this product
LinkedIn
