PMC-softDAC-18M
Software Programmable 2 µSecond DACs 18 Channel 16 bit DAC with programmable outputs
- 2 µS settling time, 0-5v range
- Six Programmable Output Ranges per channel
- Unipolar: 0V to 5V, 0V to 10V
- Bipolar Mode: ±5V, ±10V, ±2.5V, –2.5V to 7.5V
- 1LSB Max DNL and INL Over the Industrial Temperature Range
- 64k DAC buffers
- Power-On Reset to 0V
- Flash ram for configuration file
- Two stage buffers
- Global output buffer w/ internal or external triggering
- 4 User Digital I/O
Share this product
LinkedIn
Share this product
LinkedIn
The Linear LTC1588/LTC1589/LTC1592 are serial input 12-/14-/16-bit multiplying current output DACs operating from a single 5V supply, offering software-programmable uni-polar or bi-polar modes through a 3-wire SPI interface12. These SoftSpan DACs provide two uni-polar and four bi-polar output ranges, maintaining 1LSB accuracy over the industrial temperature range in both modes23. They achieve true 16-bit 4-quadrant multiplication using on-chip resistors and feature an internal deglitcher circuit that reduces glitch impulse to less than 2nV-s typically
Applications
- Process Control and Industrial Automation
- Precision Instrumentation
- Direct Digital Waveform Generation
- Software-Controlled Gain Adjustment
PMC interface
- PLX 9080
- VIO 3.3/5.0 Volts
- 32 Bit, 33 MHz
- Interrupts
- DMA
Operating: Environmental
- Operating temperature
- Commercial: 0 to +55 °C
- Optional: -40°C to +85°C
- Non-operating: -55°C to 90 °C
- Airflow requirement: .5 CFM
- Humidity: 5 to 90% (non-cond.)
- Altitude: 0 to 10,000 ft
Mechanical: Environmental
- Size: Vita 4 Type 1 IP 1.8″ x 3.9″
- Power: +5, +12, -12 volts
- Vibration: 0.5G RMS 20-2000 Hz rand
- Shock: 20 G, 11 ms, ½ sine
- Weight: tbd
- MTBF: >250000 hours
Ordering Information
- Part Number: PMC-SoftDAC-18M – 18 Channel with Memory DAC, output buffers, 2 microsecond
- Part Number: PMCSoftDAC-18M-I – Same as above with -40 to +85°C
Optional Accessories
- Part Number: TB-50-SCSI – 50 pin terminal block and 1 meter flat ribbon cable
- Part Number: CBL-50-SCSI – 50 pin, 1 meter flat ribbon cable, IDC header connector
Data Sheet – Link Here
Share this product
LinkedIn








