PMC-1553
UTMC 1553 SUMMIT CONTROLLER BUS CONTROLLER, REMOTE TERMINAL, BUS MONITOR MODES
- UTMC SUMMIT
- UT69151DX-GPC
- 128Kbytes Sram
- On-chip Transceivers
- On-board Transformers
- Long stub / Short stub
Share this product
LinkedIn
Share this product
LinkedIn
MIL-STD-1553 features options including 0 to +70 degrees, -25 to +80 degrees, and conformal coating. It has 128 Kbyte SRAM, BC/RT/M modes, separate logic for PMC interface, and dual redundant Channels A and B. The standard includes internal/external CLK, 78 ohm transformers, long/short stub, single 5 volt, low power, and LED status. Software is available with ‘C’ libraries for Windows, Linux, and VxWorks. It has a 32 MHz PMC clock and is PICMG compliant.
Features
- UTMC SUMMIT
- UT69151DX-GPC
- 128Kbytes Sram
- On-chip Transceivers
- On-board Transformers
- Long stub / Short stub
Memory
- 128 Kbyte external SRAM
I/O
- Dual 1553 bus levels
- TTL (5v) clock
Programmable via
- PMC Bus
PMC interface
- 8/32 Mhz clock
- 16 bit address
- 16 bit data
- Interrupts
- DMA
Operating: Environmental
- Operating temperature
- Commercial: 0 to +55 °C
- Optional: -25°C to +80°C
- Non-operating: -40°C to 85 °C
- Airflow requirement: .5 CFM
- Humidity: 5 to 90% (non-cond.)
- Altitude: 0 to 10’000 ft
Mechanical: Environmental
- Size: Single wide PMC 2.92″ x 5.87″
- Power: 1.5 watt
- Front panel I/O
- Vibration: 0.5G RMS 20-2000 Hz rand
- Shock: 20 G, 11 ms, ½ sine
- Weight: tbd
- MTBF: >250000 hours
Ordering Information
- Part Number: PMC-1553 – MIL-1553, BC/RT/M, UTMC SUMMIT PMC module
- Part Number: PMC-1553-I – same as above with -20 to +85 temperature rating
Optional Accessories
- Part Number: EngKit-1553 – 2 T’s, 2 Terminators, 2 1 meter cables
- Part Number: CBL-1553-1 – Standard-standard 2 meter 1553 cable
- Part Number: CBL-1553-2 – Standard-mini 2 meter 1553 cable
- Part Number: CBL-1553-3 – Mini-mini 2 meter 1553 cable
Data Sheet – Link Here
Share this product
LinkedIn







