- Four Z85233 Enhanced Controller
- Quad synchronous / Asynchronous serial ports
- 2 KB FIFO per Line (TX and RX)
- RS-422, RS-485 HDLC, SDLC
- Individual baud rate generators per port
- 230 Kbits Async. Up to 2 Mbits Sync.
- Full handshake control line
- Software Programmable 100 Ohm Termination
- Full modem control
- 2 DMA Channel
- Software examples included
- VxWorks available
PMC-SCC04Z-x-y
Quad Synchronous Serial Communication Controller RS-422/485
- Four Z85233 Enhanced Controller
- Quad synchronous / Asynchronous serial ports
- 2 KB FIFO per Line (TX and RX)
- RS-422, RS-485 HDLC, SDLC
- Individual baud rate generators per port
- 230 Kbits Async. Up to 2 Mbits Sync.
- Full handshake control line
- Software Programmable 100 Ohm Termination
- Full modem control
- 2 DMA Channel
- Software examples included
- VxWorks available
Share this product
LinkedIn
PMC-SCC04Z-x-y
Quad Synchronous Serial Communication Controller RS-422/485
The PMC-SCC04Z-x-y module is a quad-channel serial communication controller featuring 128-byte FIFOs per line, based on four enhanced Z85233 chips from Zilog. It offers improved SDLC handling and larger FIFOs compared to standard controllers. The module supports four asynchronous ports up to 230 kbaud and synchronous ports up to 2 Mbaud full-duplex, with independent baud rate generators for each channel. It is compatible with RS-232 and RS-422/RS-485 interfaces, making it versatile for various serial communication applications
PMC interface
- PLX 9056- VIO 3.3/5.0 Volts
- 32 Bit, 33/66 MHz
- 2Ch DMA
Operating: Environmental
- Operating temperature
- Commercial: 0 to +70 °C
- Optional: -40°C to +85°C
- Non-operating: -45°C to 90 °C
- Airflow requirement: .5 CFM
- Humidity: 5 to 90% (non-condensing)
- Altitude: 0 to 10,000 ft
Mechanical: Environmental
- Size: Single wide PMC 2.92″ x 5.87″
- Front / Rear panel I/O
- Power: +5, +12, -12 volts
- Vibration: 0.5G RMS 20-2000 Hz rand
- Shock: 20 G, 11 ms, ½ sine
- Weight: tbd
- MTBF: >250000 hours
Ordering Information
- Part Number: PMC-SCC04Z-X-Y 4 Ch RS-422/RS-485 Module
- X: Number of channels 1-4
- Y: FP: Front Panel I/O or RP: Rear Panel I/O
Optional Accessories
na
Data Sheet – Link Here
- Four Z85233 Enhanced Controller
- Quad synchronous / Asynchronous serial ports
- 2 KB FIFO per Line (TX and RX)
- RS-422, RS-485 HDLC, SDLC
- Individual baud rate generators per port
- 230 Kbits Async. Up to 2 Mbits Sync.
- Full handshake control line
- Software Programmable 100 Ohm Termination
- Full modem control
- 2 DMA Channel
- Software examples included
- VxWorks available
| Mechanical Interface | Switched Mezzanine Card (XMC) Interface confirming to ANSI/VITA 42.0-2008 (Auxiliary Standard) Standard single-width (149mm x 74mm) | |||||||||
| Electrical Interface | PCI Express x4 Link (Base Specification 2.1) compliant interface conforming to ANSI/VITA 42.3-2006 (PCI Express Protocol Layer Standard) | |||||||||
| PCI Express Switch | PI7C9X2G312GP (Pericom) | |||||||||
| PCI Express to PCI Bridge | XIO2001 (Texas Instruments) | |||||||||
| User configurable FPGA | TXMC639-10R: XC7K160T-2FBG676I (AMD) TXMC639-11R: XC7K325T-2FBG676I (AMD) | |||||||||
| SPI-Flash | MT25QL128 (Micron) 128 Mbit (contains TXMC639 FPGA BRD) or compatible; +3.3 V supply voltage | |||||||||
| DDR3 RAM | 2x MT41K256M16TW-107 (Micron) 256Meg x 32 bit | |||||||||
| Board Configuration Controller | LCMXO2-7000HC (Lattice) | |||||||||
| ADC | LTC2320 -16 (Analog Devices) | |||||||||
| DAC | AD5547BRUZ (Analog Devices) | |||||||||
| A/D Channels | TXMC639-10R: 8 Differential 16bit A/D Channels TXMC639-11R: 16 Differential 16bit A/D Channels Input Configuration per BCC Device: Input Voltage Ranges: Differental : ±20.57 V, ±10.28 V or ±5.14 V (Single-Ended: ±10.28 V, ±5.14 V or ±2.57 V) All analog inputs are connected via an impedance converter and a second operation amplifier for level adjustment and filtering to the differential ADC inputs. The -3 dB limit of this input stage is at approx. 8MHz | |||||||||
| D/A Channels | TXMC639-10R: 4 Single-Ended 16 Bit D/A Channels TXMC639-11R: 8 Single-Ended 16 Bit D/A Channels Output range configurable per D/A channel. Maximum single-ended Output Voltage – Vout: ±10 V Maximum Output Drive Current for each Output: 10 mA Maximum Capacitive Load for each Output: 1000 pF Typical Settling Time for a 10 mA / 1000 pF: < 1 µs | |||||||||
| Digital Front I/O Channels | 32 digital I/O Lines
| |||||||||
| Digital Rear I/O Channels | 64 direct FPGA I/O lines to P14 Rear I/O connector
4 MGT line to P16 Rear I/O connector
| |||||||||
| Front I/O | Front I/O Samtec – ERF8_050_01_L_D_RA_L_TR | |||||||||
| P14 Rear I/O | 64 pin Mezzanine Connector (Molex 71436-2864 or compatible) | |||||||||
| P16 Rear I/O | 114 pin Mezzanine Connector (Samtec – ASP-105885-01) | |||||||||
| Power Requirements 1) | Depends on FPGA design With TXMC639 Board Reference Design / without external load
| |||||||||
| Temperature Range | Operating: – 40 °C to + 85 °C Storage: – 55 °C to + 125 °C | |||||||||
| MTBF 1) | 157 000 h to 161 000 h | |||||||||
| Humidity | 5% – 95% non-condensing | |||||||||
| Weight | 140 g |
1) depends on variant, for further details see User Manual
TXMC639-10R
| 8x Analog In, 4x Analog Out, XC7K160T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K160T-2FBG676), 1GB DDR3, 8x Analog In, 4x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
TXMC639-11R
| 16x Analog In, 8x Analog Out, XC7K325T-2FBG676 Kintex™ 7 FPGA AMD Kintex™ 7 FPGA (XC7K325T-2FBG676), 1GB DDR3, 16x Analog In, 8x Analog Out, 32x digital Front I/O, 64x direct FPGA Rear I/O Lines and 4x MGTs Rear I/O |
SOFTWARE
Share this product
LinkedIn
