PXIe-SCC08F
PXIe Octal Serial I/O With 4K FIFO
- Eight Z85233 Enhanced Controller
- Octal synchronous / Asynchronous serial ports
- 4K FIFO per Line (TX and RX)
- Software selectable RS-232 or RS-422, RS-485 HDLC, SDLC
- Individual baud rate generators per port
- 230 Kbits Async, up to 2 Mbits Sync
- Full handshake control line
- Software programmable 120 Ohm Termination
- Full modem control
- Software examples included
Share this product
LinkedIn
Share this product
LinkedIn
The PXIe-SCC08F module is an Octal channel serial communication controller with 4K Fifo per Line. The PXIe-SCC08F module is based on 8 enhanced Z85233, with larger FIFOs and several SDLC improvements from Zilog. This module provides Eight asynchronous ports up to 230 kbaud and synchronous ports up to 2 Mbaud full-duplex channels, with an independent baud rate generator for each channel. Several types of interface are supported by the PXIe-SCC08F module: – RS-232 and RS-422 / RS-485 with programmable 120 Ohm Termination User Clock for Baud rate generator.
PXIe Interface
-
- Compatible with PXIe Bus specification
- X1 PCIexpress Lane
- Local Bus Clock rates at 66MHz
- Multiple DMA operational modes
- Direct master data transfers
- Direct slave data transfers
Operating: Environmental
-
- Operating temperature:
- Commercial: 0 to +70 °C
- Optional: -25°C to +80°C
- Non-operating: -40°C to 85°C
- Airflow requirement: 0.5 CFM
- Humidity: 5 to 90% (noncondensing)
- Altitude: 0 to 10,000 ft
- Operating temperature:
Mechanical: Environmental
-
- Size: Vita 4 Type 1 IP (1.8” x 3.9”)
- Power: +5, +12, -12 volts
- Vibration: 0.5G RMS (20-2000 Hz rand)
- Shock: 20 G, 11 ms, ½ sine
- Weight: TBD
- MTBF: >250,000 hours
Ordering Information
-
- Part Number: PXIe-SCC08F
8 Ch RS-422/RS-485 Module
- Part Number: PXIe-SCC08F
Optional Accessories
-
- Part Number: TB-68-MDR
68 pin terminal block and 1meter flat ribbon cable - Part Number: CBL-68-MDR
68 pin, MDR Cable connector
- Part Number: TB-68-MDR
Data Sheet – Link Here
Share this product
LinkedIn




